background image

ResPlus Auto CPAP Machine

Model C-20A CPAP/APAP

QUICK START GUIDE

THIS GUIDE IS NOT INTENDED TO REPLACE THE 

MANUFACTURERS MANUAL

Whats included:

1) Carry Bag

2) ResPlus Blower Unit

3) ResPlus Humidifier Unit

4) Power cord

5) Hose

6) Manufacturers  Manual

7) Replacement filters

1

2

3

5

7

6

4

STEP 2

IMPORTANT INFORMATION

THIS UNIT COMES FROM THE FACTORY PRE-SET 

WITH THE FOLLOWING PARAMETERS:

MODE - APAP

LOW PRESSURE - 4 cm H2O

HIGH PRESSURE - 10cmH2O

AUTO ON - OFF

AUTO OFF - OFF

IF YOU NEED TO CHANGE ANY OF THESE PRE-SET 

PARAMETERS, REFER TO THE MANUAL (Page11)

STEP 1

REMOVE ALL THE COMPONENTS FROM THE BOX

STEP 3

As shipped, the device comes as two separate units as shown below:

Depending on user requirements, the two units can be attached 

by aligning the pins and pressing the two units together un-

til an audible click is heard. They can be seperated by pressing 

the rectangular release button on the back of the humidifer unit.

Control Unit

Humidification Unit

If the shown presets are acceptable, flip this sheet over 

and procede to QuickStart STEP 4. 

Release Button

View of back 

of unit

Отзывы: