Remlinger 3500, Руководство пользователя и инструкции по установке

Страница: 4 / 58

Operating Tips
•
Read and understand this manual before operating your Rolling Finisher
(RF), please call with any questions before operating. Damage may occur if
cart is improperly used or operated.
•
Always place the front roller in the aggressive mode (position A). The rear
roller can be set in either aggressive or passive mode. See page 8 for more
information.
•
We recommend raising your RF cart before turning on each end. Turning
with the rollers on the ground creates side stresses and could cause damage
to the rollers, bearings, and / or frames.
•
Always look over your RF cart before each operation. Look for loose bolts,
frayed hoses, damaged parts, or flat tires.
•
Always place all transport locks in place when transporting or storing your
Rolling Finisher. This machine is equipped with locks for all lift cylinders.
•
Unfolding the machine: for field operation, keep the transport locks on all lift
cylinders (including gage wheels). Unfold the wings and then remove the
transport locks. If the transport locks are removed, the base will drop to the
ground first. The rollers on the wings will be forced into the ground and could
cause damage to the rollers, bearings, and / or frames.
•
Folding the machine: for transport, the transport locks do not have to be in
place to fold the wings. The cart will first raise and than the wings will fold. It
is recommended that the transport locks be in place before transporting.
•
Caution : Remember to rotate the rear jack stand into transport position after
attaching the RF cart to your implement. Damage to the jack or mounting
hardware can result.
•
Make sure hitch pin with keeper, hose connections, and safety lighting
(optional) plugs are all connected properly before operating.
4