REMKO Wi-Fi stick Smart-Control, Инструкции по эксплуатации и монтажу, Страница: 9 / 20

Push-button operation
Action Description
Short press, < 2 seconds The LED lights up for 5 minutes and indicates the status
Press and hold, 2 - 6 seconds
When released, the Wi-Fi stick performs a reset/restart, LED flashes
green
Press and hold, 6 - 10 seconds
When released, the Wi-Fi stick clears the WLAN SSID (network des-
ignation) and the WLAN password and performs a reset. After the
reset, the Wi-Fi stick is in WPS mode, the LED flashes yellow
Press and hold, 10 - 14 seconds
When released, the Wi-Fi stick clears the WLAN SSID (network des-
ignation), the WLAN password and the WEB portal data and per-
forms a reset (LED flashes red). After the reset, the Wi-Fi stick is in
WPS mode, the LED flashes yellow
Press and hold > 14 seconds
No action is performed, the LED lights up for 5 minutes and indi-
cates the status
3.2 Connection via WPS
If the Wi-Fi stick is in WPS mode (LED flashes yellow), the WPS button can be pressed on the router to
establish a connection between the router and the Wi-Fi stick. Alternatively, the WLAN data can also be
stored when setting up the app.
3.3 Access via the REMKO Smart-Control app
The REMKO Smart-Control app is available for end devices with iOS (from 13.7.) and Android (from 6.0)
operating systems. By scanning the QR code, you should be redirected to the Apple App Store (iOS) or the
Google Play Store. An active internet connection is required to use the REMKO Smart-Control app.
https:smartweb.remko.media/App
Fig. 2: Access via the REMKO Smart-Control app
9