REMKO Smart-Control Touch, Руководство по эксплуатации

Страница: 81 / 116

"Settings" menu item (continued) - Expert
Manual mode - probes (continued)
Parameter Selection parameter
Storage tank temperature, upper S08 Probe value / stipulated value
Temperature S08 -60°C - 250°C
Storage tank temperature, centre S09 Probe value / stipulated value
Temperature S09 -60°C - 250°C
Outside temperature S10 Probe value / stipulated value
Temperature S10 -60°C - 250°C
1st mixed heating cycle return temperature S11 Probe value / stipulated value
Temperature S11 -60°C - 250°C
3rd mixed heating cycle return temp.
*) S11.2 Probe value / stipulated value
Temperature S11.2 -60°C - 250°C
1st mixed heating cycle inlet temperature S12 Probe value / stipulated value
Temperature S12 -60°C - 250°C
3rd mixed heating cycle inlet temp.
*) S12.2 Probe value / stipulated value
Temperature S12.2 -60°C - 250°C
Heat generator (indoor unit)
inlet temperature (HP 1)
S13 Probe value / stipulated value
Temperature (HP 1) S13 -60°C - 250°C
Heat generator (indoor unit)
inlet temperature (HP 2
*)
)
S13.2 Probe value / stipulated value
Temperature (HP 2
*)
)
S13.2 -60°C - 250°C
2nd mixed heating cycle
return temperature
S14 Probe value / stipulated value
Temperature S14 -60°C - 250°C
*)
This parameter may differ from your display depending on the type and model of the heat pump.
81