REMKO 1609240, Инструкции по эксплуатации и монтажу

Страница: 10 / 32

4 Operation
The system can be operated by means of the
touch panel on the unit or via the infrared remote
controller. The functional operation is identical.
Infrared remote control
The infrared remote control sends the programmed
settings a distance of up to 6 m to the receiver of
the indoor unit. Data will only be received correctly
if the remote control is pointed at the receiver and
no objects are obstructing the transmission path.
A
max. 6 m
Fig. 3: Maximum distance
NOTICE!
Immediately replace flat batteries with a new
set, otherwise there is a risk of leakage. It is
recommended that the batteries are removed if
the equipment is shut down for longer periods.
The infrared remote control is operated via a
button battery of type CR2430. Replacement is
carried out at the rear of the remote control. Turn
the cover counter-clockwise with a flat object (e.g.
a coin) to open. Then, the old button battery can
be removed and the new button battery inserted
with the positive terminal facing upwards. Ensure
that only button batteries of type CR2430 (3V) are
used when replacing.
Fig. 4: Changing the battery
Help save on energy consumption in stand-by
mode! If the device, system or component is not
in use, we recommend disconnecting the power
supply. Components with a safety function is
excluded from our recommendation!
REMKO series KWT
10