XR1370
Use and Care Guide
Register Your New Product Today!
By registering your new Remington
®
product, you will receive these important benefits:
Proof of Ownership Product Protection Product Registration Special Offers
Register online at: www.RemingtonProducts.com
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be observed,
including the following.
Please read all instructions before using this shaver.
WARNINGS
To reduce the risk of burns, fire, electric shock, or injury to persons:
• When connecting the charging unit to a power source outside of the USA or
Canada, use a plug adapter suitable for the power outlet. This device has a charg-
ing adapter that will work with worldwide 100V-240V power outlets.
• Only use the power adapter provided with this device.
• Do not reach for the appliance if it has fallen into water while plugged into the
power source. Unplug from the power source at the wall immediately.
• Shaver may be rinsed under water or used in the shower, but never use the
charging unit in the shower.
• Detach the shaver and charging unit from the power source before cleaning.
• Except when charging, always unplug this appliance immediately after using.
• When recharging place in a safe position, out of the reach of children and pets.
• Close supervision is necessary when this appliance is used by, on, or near children
or individuals with certain disabilities or special needs.
• Use this appliance only for its intended use as described in this manual.
• Do not use attachments not recommended or provided by the supplier.
• Never operate this appliance if the electrical cord is frayed or the plug is damaged.
• Keep the electrical cord away from heated surfaces.
• Never drop or insert objects into any of the appliance's openings.
• This appliance is intended for household use only.
• Do not use outdoors, or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
• Always attach the plug to the appliance, then to the wall outlet. To disconnect, turn
all controls to OFF, then remove plug from outlet.
• Always pull on the plug body to unplug the appliance from the wall socket. Never
pull on the electrical cord.
• Do not plug in or unplug this appliance when your hands are wet.
• Do not use extension cords or a voltage converter with this appliance.
• To prevent breaking the power cord, do not wrap it around the appliance.
• Always store the appliance and charger in low moisture area.
• Do not expose the appliance to temperatures over 140° F (60° C).
• Detach removable power cords from the appliance during storage.
• Do not use this shaver if the cutting head surfaces are damaged or broken as
facial injury could occur.
• This shaver and trimmer are intended for use on facial hair only. It should not be
used for longer hair on your head or body.
Product Features
SHAVER PARTS
1.
Hyperflex cutting head
2.
Power on/off button
3.
Battery Indicator display
4.
Pop-up detail trimmer
5.
Charging pins
6.
Charging Stand
7.
Charging adapter
1
2
5
6
3
4
SAVE THESE INSTRUCTIONS
HYPERFLEX
7
Hyperflex Cutting head
• Cutting head pivots and flexes to comfortably follow the contour of your face.
Dual Track Cutters
• Three rotary cutters with two cutting tracks for fast efficient shaves.
Lithium Battery
• Durable, long lasting power supply. Up to 3X longer life than standard
rechargeable cells.
60 minute run time
• Weeks of daily shaving on a single charge.
90 minute charge time
• Fast delivery of a full battery charge.
Waterproof
• Use dry or with shaving gel. Safe to use shaver in the shower for added comfort.
• Fast, simple cleaning under the faucet.
Worldwide voltage
• Provided charging adapter works with 100V to 240V power source.
Folding charge stand
• Rotate open to hold shaver while charging. Collapses down around shaver for
travel or storage.
Performance Features
Your Hyperflex shaver may be used either dry or wet with shaving cream or gel.
We recommend that you use the shaver in the shower for optimal performance.
Wet Shaving
• Wet shaving will provide a very comfortable and close shave. The shaver is safe to
use in the shower or can be rinsed under running water at the sink.
• Wet your face and neck area with water.
• Apply shave gel or foam to your face.
• Press the power button to turn the shaver on. Rinse the cutting head under
running water.
• Place the shaver cutting head against your skin with all three cutters touching
your skin.
• Pressing lightly against your skin, move the shaver head in slow, small
circular motions.
• Hairs on your face and neck may grow in different directions. Moving your shaver
against the direction of hair growth will be most effective.
• You may use your free hand to gently stretch your skin tight which can aid in mak-
ing hairs stand up to more easily enter the cutting slots.
• To trim sideburns or edges of goatees or beards, press the pop-up trimmer release
button to activate the trimmer. Place the trimmer blade parallel with your skin and
use downward strokes to cut.
• When finished, rinse your face and check for any hairs that may have been missed
for quick touch up.
• When using your shaver with foams or gels it is important to rinse the cutting head
clean after each use. This will avoid having the gels dry in the cutting head and
clogging the shaver. Refer to the cleaning instructions to keep your shaver cutting
at peak performance.
Shaving Technique
Dry Shaving
• Dry shaving is a fast and low mess way to shave.
• Press the power button to turn the shaver on.
• Place the shaver cutting head against your skin with all three cutters touching
your skin.
• Pressing lightly against your skin, move the shaver head in slow, small
circular motions.
• Hairs on your face and neck may grow in different directions. Moving your shaver
against the direction of hair growth will be most effective.
• You may use your free hand to gently stretch your skin tight which can aid in mak-
ing hairs stand up to more easily enter the cutting slots.
• To trim sideburns or edges of goatees or beards, press the pop-up trimmer release
button to activate the trimmer. Place the trimmer blade parallel with your skin and
use downward strokes to cut.
• Refer to the cleaning instructions to keep your shaver cutting at peak performance.
Cleaning and Care
Note: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
• Your HyperFlex shaver is built to be watertight. This makes clean up fast and easy
as it is safe to rinse the shaver body and head under running water.
• Do not use strong detergents or chemicals to clean your shaver. Water alone or
with mild anti-bacterial soap is recommended.
• Do not place your shaver in the dishwasher.
Daily Cleaning
1. Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose
the hair pocket where shaven hair particles are collected.
2. Tap out excess shavings in the sink or waste basket. (E)
3. Rinse both the cutter face and hair pocket under warm running water to rinse
clean.
4. Snap the cutter face back onto the shaver.
Weekly Cleaning
1. A more thorough cleaning of the cutters on a weekly basis will add to the life
and performance of your shaver.
C
E
D
F
G
H
I
J
K
2. Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose the
hair pocket where shaven hair particles are collected.
3. Tap out excess shavings in the sink or wastebasket. (E)
4. Release the blue inner cutter support by sliding it out of the snap lock. Note the
small triangle at the center of the blue support. With your fingertip, slide the blue
support back to release the snap. (F) (G)
5. Remove the inner cutters from the individual cutting heads. (H) Note that the hubs
of the cutters are color coded to match the color of the outer cutters. The cutters
should be mated with their matching color for best performance and life.
6. Thoroughly rinse away any small debris from both the inner and outer cutters
and hair pocket.(I)
7. Replace the inner cutters. Remember to match the color coded hubs. (J)
8. Replace the blue inner cutter support. Be sure it securely snaps back in under
the small triangle at the center of the cutting head. (K)
9. The cutter assemblies may be lubricated with a single drop of household oil.
10. Snap the cutter face back onto the cutting head base.
When your rechargeable shaver reaches the end of its useful life, the LiFePO4
batteries must be removed from the shaver and be recycled or disposed of prop-
erly in accordance with your state and local requirements. If this is not required
by law, you may elect to dispose of the shaver with the batteries.
CAUTION!
Do not put in fire or mutilate your batteries when disposing as they
may burst and release toxic materials. Do not short circuit as it may cause burns.
Dispose of properly in accordance with your local and state requirements.
To Remove the Rechargeable Battery:
1. Unplug the shaver
2. Run shaver until the motor stops
3. Remove the head from the shaver (Pull head up and off)
4. Using a small screwdriver, pry the ‘collar’ off of the top of the handle
5. Using a small screwdriver, pry the front cover from the body
6. Remove three screws located on front of shaver
7. Using a small screw driver, pry up the newly unsecured inner housing to expose
the battery
8. Pry battery free from circuit board
9. Dispose of battery properly
Product Disposal
Questions or comments:
Call 800-736-4648 in the US or 800-268-0425 in
Canada. Or visit
RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada, Inc.,
131 Saramia Crescent, Vaughan, ON L4K 4P7
® Registered Trademark and TM Trademark
of Spectrum Brands, Inc.
© 2015 Spectrum Brands, Inc. 9/15 13083-00
Made in China
T22-0003854
By registering your new Remington
®
product you will receive these important benefits:
• Proof of ownership
• Product protection
• Product registration
• Special offers
Register online at: RemingtonProducts.com
Product Registration
Shaver Replacement Parts
To keep your HyperFlex shaver working at peak performance, it is recommended
that you replace the cutting head after every 12-18 months of use. Indication that
your shaver may need to have the cutting head replaced would be if you notice an
increase in irritation of your skin after you shave or you feel hair pulling due to dull
cutting blades.
The replacement cutting head for your shaver is model number SPR-XR
Shaver Accessories
Remington also offers these additional attachments that fit
your HyperFlex shaver. These attachments easily snap on
and off interchangeably with your shaving head.
Groomer attachment with adjustable length settings: SPR-XT
• If you like to wear a beard, goatee, or stubble look, the groomer head will trim your
facial hair to adjustable lengths between .5 mm and 5 mm.
Facial Brush attachment: SPR-XFB
• The facial brush attachment is used for deep cleaning and exfoliating for healthy
facial skin. Two brush types are available.
SPR-XFM Massage Brush
SPR-XFN Cleansing Brush
How to Order Parts and Accessories
Two easy ways to order spare parts and accessories are available.
• Order by Phone:
U.S. Residents: 1-800-392-6544
Canadian Residents: 1-800-268-0425
• Order Online:
RemingtonProducts.com
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to:
Remington Returns Center,
507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call
800-736-4648 in the US or 800-268-0425 in Canada.
Warranty excludes:
■
Heads and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
■
Accident, misuse, abuse or alteration of the product
■
Servicing by unauthorized persons
■
Use with unauthorized accessories
■
Connecting it to incorrect current and voltage
■
Wrapping cord around appliance causing premature wear & breakage
■
Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Warranty
Performance Guarantee
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington® branded product,
you are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call
800-736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
Contains a Listed Adaptor
Charging
Charging Process
1. Plug the power cord adapter into the charging stand.
Unfold the charging stand into the open position. Plug the cord
into the port at the side of the charging stand. The plug has a
custom shape to match the charge stand and prevent use with
incorrect adapters. (A)
2. Plug the adapter into the wall outlet.
Place the stand on a flat surface and where it cannot be accidently
bumped into standing water such as a sink or bathtub.
3. Place the shaver into the charge stand.
Position the shaver body so the charging pins of the shaver
mate with the charging strips in the charge stand. (B) Note
the LED battery display will indicate that the battery is actively charging as
noted in the LED indicator section of this manual.
4. Use the shaver until a recharge is required.
Do not leave the charger plugged in so that you are recharging the shaver after
every use. This will shorten the life of the battery. To use the charge stand to
hold the shaver on your counter between uses, simply unplug the adapter cord
from the charge stand and store it away until a recharge is needed.
Quick Charge Feature
• The shaver does not need to be fully charged to function. The quick charge allows
you to place the shaver on charge for 5 minutes and will deliver up to 5 minutes
of use – approximately one or two shaves.
LED lights display the battery charge level. The shaver has 14 red LED
lights shaped in numerical digits.
•
Full Charge:
When fully charged, the LED numbers will show “60”. This indicates the
shaver has 60 minutes of run time available. After each use the numbers will display
how many minutes of run time are left for 5 seconds after the shaver is turned off.
•
Low Charge:
When the shaver has 3 minutes of run time remaining the number
display will show flashing “Lo”. This indicates the shaver needs to be recharged
•
Charging:
When placed in the plugged in charge stand, single red LED lights will
flash sequentially in a clockwise direction around the perimeter of the display. This
indicates the shaver is taking a charge. At full charge all the LED lights will flash
“60” to indicate the battery is fully charged.
The shaver has an electronic travel lock feature intended to prevent the
shaver from turning on and discharging accidently while packed in your
luggage.
•
To set the travel lock on:
Depress and hold the on switch for 3 seconds. The
shaver will turn on, and then will shut off after 3 seconds. The LED display will
flash five times to indicate the lock is set.
• While the travel lock is set, if the on switch is pressed, the LED display will flash
three times to indicate the shaver is in the travel lock mode.
•
To turn the travel lock off:
Depress and hold the on switch for 3 seconds. The
LED display will flash three times while the button is being held and then the
shaver will turn on.
Digital Battery Indicators
Travel Lock Feature
A
B
Use with gel or foam in
the shower for ultimate comfort.
