Remington X5 Limitless, Руководство пользователя

Страница: 5 / 100

5
ENGLISH
GETTING STARTED
CHARGING
• It is recommended to fully charge your product before using for the first time.
• Ensure the product is switched off.
• Connect the product to the USB cable and then to the USB end of the cable to a
powered USB port.
CHARGING INDICATOR LIGHTS
• The red light will flash slowly when your shaver is charging.
• When charging is complete, the red light will go out and the green light will come on
for 5 seconds.
• If your shaver does not run when you switch it on, and the red light slowly flashes for 5
seconds, your shaver needs charging.
• Run time from fully charged is up to 50 mins.
• Charge time from empty is 90 mins.
• Do not recharge your product after each use as this will shorten the life of the battery.
• Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
QUICK CHARGE FEATURE
• Your shaver has a 5 minute quick charge feature that will provide enough charge for 1
shave (3 minutes).
INSTRUCTIONS FOR USE
SHAVING
1. Switch the shaver on by pressing the on/off button.
2. Stretch the skin with your free hand so the hairs stand upright.
3. Only apply light pressure on the shaving head while shaving (pressing too hard can
cause skin irritation).
4. Use short, circular strokes.
SHAVING WITH SHAVING GEL
• Follow the same instructions as dry shaving if using shaving gel.
• CAUTION After use with shaving gel, please rinse the head and cutters under warm
water to clean away any excess gel and debris.
DETAIL TRIMMER ATTACHMENT
To fit the detail trimmer attachment:
1.
Switch off your shaver.
2. Pull the head and cutter assembly away from the body of your shaver (Fig A).
3. Clip the detail trimmer onto the body of your shaver (Fig. B).
GB
DE
NL
FR
ES
IT
DK
SE
FI
NO
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE