7
REMOVING THE RECHARGEABLE BATTERY
We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled
correctly.
•
The rechargeable battery must be removed from the appliance before it is
scrapped.
•
Disconnect the charging adapter before removing the battery.
1. Run the shaver until the motor stops.
2. Unplug the shaver.
3. Using a small screwdriver, pry the front cover from the shaver (Fig. H).
4. Remove the rear cover (Fig. I).
5. Remove the 4 screws located on the front of the shaver (Fig. J).
6. Pry the battery carrier and circuit board from the shaver body then cut the wires
(Fig. K-L).
•
Used batteries must be removed from the appliance and disposed of at an
appropriate official recycling/collection point.
•
Do not attempt to operate the shaver once you have opened it.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
