5 Commissioning
5.1 Switching on the control panel
The HMI S-control control panel is ready for use as soon as the power to
the boiler is switched on.
The start-up program starts and cannot be interrupted.
5.2 Start program
Various short items of information appear on the screen during start-up.
These items of information are displayed one after the other.
Display control panel version (
).
Search for connected options (
).
Load information from CU board (
).
Display of CU board software version (
).
Display of CU board parameter version (
).
After the program starts, the menu display appears with the day number
and current time.
If a fault occurs during start-up, the symbol appears with a flashing
error code on the display. The meaning of the error codes can be found
in the error table.
5 Commissioning
8
7616014 - v.03 - 15022016
