Sub-status
Burner off
Post ventilation
Close flue gas damper/external gas valve
Recirculation protection
Stop fan
Limited power
Pump post circulation
Pump off
Start anti-swing
Blocking code
Lock out code
7.4 Reading out the water pressure and flow temperature
1. Press the left-hand key once to display the current water pressure
and flow temperature.
The water pressure and flow temperature appear on the screen.
2. The main display reappears after three minutes.
7.5 Reading out connected (optional) control PCBs
Reading (optional) PCBs connected is only possible when the icon is
shown in the display.
1. Navigate to the icon to read the PCBs connected.
2. Press the
key to open the menu.
Note
Reading PCBs connected is only possible if the icon flashes.
The display first shows the PCB version
3. Press the key to receive information about the (optional) connec
ted PCB (for example: SCB-01)
4. Press the key to receive information about the next connected
PCB. This information is only displayed if several PCBs are connec
ted.
5. Press the
h
key twice to go back to the main display.
7.6 Reading out the Counter menu
1. Navigate to the Counter menu.
2. Press the
key to open the Operating hours/Timer Program/Time
display menu.
3. Press the
key to access the Operating hours menu.
4. Press the key to scroll through the counter list.
Parameter
Description
Unit
Number of hours boiler live
h
Fig.95 Displaying the water pressure and
flow temperature
MW-3000378-01
Fig.96 Accessing reading of PCBs connec
ted
MW-3000339-01
Fig.97 Getting information from the PCB
connected
MW-3000340-01
Fig.98 Going back to the main display
MW-3000341-01
Fig.99 Accessing the Counter menu
MW-3000320-01
Fig.
100
The Counter menu appears
MW-3000321-01
7 Settings
24
7616014 - v.03 - 15022016
