Caution
Changing the factory settings may adversely affect the operation
of the boiler.
1. Navigate to the Installer menu.
Note
The Installer menu is available only when the icon flashes.
2. Press the
key to open the Installer menu.
3. Keep pressing the key until the code
is displayed.
4. Press the
key to confirm opening the Installer menu.
The parameters available to the Installer are displayed.
5. Keep pressing the or key until the required parameter is dis
played.
6. Press the
key to confirm the selection.
7. Press the or keys to modify the value of the parameter.
8. Press the
key to confirm the new value of the parameter.
9. Press the
h
key twice to go back to the main display.
7.2.6 Setting the maximum output for central heating
See graph for the relationship between output and fan speed for gas types
G20 or G25. The speed can be changed using parameter
.
Change this parameter in the Installer menu.
See
Changing installer parameters, page 17
Fig.50 Navigating to the Installer menu
MW-3000312-01
Fig.51 Entering the code
MW-3000313-01
Fig.52 Confirming the Installer menu
MW-3000314-01
Fig.53 Selecting the parameter
MW-3000315-01
Fig.54 Confirming the selection
MW-3000336-01
Fig.55 Modifying the value
MW-3000337-01
Fig.56 Confirming the new value
MW-3000338-01
Fig.57 Back to the main display
MW-3000316-01
7 Settings
18
7616014 - v.03 - 15022016
