Warning
Caution with main supply and live wires. Install with qualified technician or trained
personnel.
Installation Guide
(PLT-412)
C
Ceiling Suspension
Ceiling Mount
Important Note
Do not adjust the Upper Limit of the lift higher than the original factory
preset position.
If adjusted, the lift will move into the frame and be stopped by force
and not the Upper Limit Switch. This will cause overheating of the
motor, rendering the lift to being unable to operate properly.
-
+
-
+
Adjust “
-
” : Less lift retraction
Adjust “
+
” : More lift retraction
Adjust “
-
“ : Less lift drop
Adjust “
+
“ : More lift drop
Front
View
Upper Limit
Lower Limit
Allen Key
51.00 cm
1 0
m
5 .
0 c
8.00 cm
4.50 cm
A) Drill Dia. 10mm holes to a depth of 35mm.
(Note: Do not drill too deep)
B) Insert M8 anchor into the hole.
C) Use pin punch to expand the anchor.
Adjustable
7 cm to
138 cm
Hammer
Pin Punch
M8 Anchor
10mm Drill
Power Drill
35
Website: www.remacotech.com
COPYRIGHTS 1998
REMACO TECHNOLOGIES PTE LTD
Wall
Swtich
D) Connection of all cables to the
MPC-850 (Refer to Installation
Guide for MPC-850)
Types of Installation Mount
Steps for Installation
Step 1
Step 2
Step 3
Step 4
PLT
V: 1.0
PLT-412
All connections
are to the MPC
Connect
to the MPC
MPC
For connection details,
please refer to the
Installation Guide
provided
Important Note
MPC
Sensor
UP
DO WN
Screen Infrared Remote
(4-Channel Control)
STOP
UP
DO WN
STOP
UP
DO WN
STOP
UP
DO WN
STOP
Ch1
Ch2
Ch3
Ch4
4-Channel
IR Remote
Projector
Projector Lift
Continue next page
Front
Back
Front
Back
12 x 4 Nos.
54.50 cm
55.00 cm
5. 0
cm
4 5
18.50 cm
Adjustable
20-32cm
Red Knob
M8 Threaded
(Optional)
8.00 cm
