ReliOn SS2280, Руководство пользователя

Страница: 11 / 83

About This Manual
1230B0033901
iii
Safety Precautions
Observe the following safety precautions when you are connecting or disconnecting any
device.
Regarding the standards of workstation regulations, do not place the server in the visual
field of the user, because of the glossy front of the case.
The product is non-consumer product and for profession technical person used only.
Operation Safety
Any operation on this server must be conducted by certified or experienced engineers.
Before operating your server, carefully read all the manuals included with the server
package.
Before using the server, make sure that all cables are correctly connected and power
cables are not damaged. If any damage is detected, contact your dealer as soon as
possible.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Before opening the chassis panels, make sure all power cables are unplugged.
Avoid dust, humidity, and extreme temperatures; place the server on a stable surface.
If the power supply is broken, do not try to fix it by yourself. Contact an authorized
dealer.
It is recommended that you wear gloves when assembling or disassembling the server
to protect from cuts and scrapes.
When the server is powered on, heat sinks and the surfaces of certain IC devices may
be hot. Do not touch them. Check whether the fans are functioning properly.
Electrical Safety
Before installing or removing signal cables, ensure that the power cables for the system
unit and all attached devices are unplugged.
To prevent electric shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing any additional device to or from the system, ensure that the
power cables for those devices are unplugged before the signal cables are connected.
If possible, disconnect all power cables from the existing system before you add a
device.