1-877-789-3245 | [email protected] | www.reliance-foundry.com
Concrete Bollard Installation
New Concrete
Parts List
Installation Equipment
#
PART
QTY
1
Concrete Bollard
1
3
Fitted Rebar Template (supplied)
1
Auger
Chalk/Marker
Dirt Tamper
Measuring Tape
Level
Shovel
To protect the finish, keep bollards in packaging
until exact moment of installation.
Handle with care to avoid scratching or
damaging bollard surfaces.
Consider local soil conditions before
proceeding with bollard installation.
Bollards shown in the diagrams may not be the same model as the bollards shipped in this order. This does not affect the integrity of the installation.
Before Installation
STEP 1:
Study the site plans and mark the intended
location of each bollard on the plan.
STEP 2:
Always check for hazards such as water pipes,
gas lines, and underground wiring before digging.
STEP 3:
Please consult your local Building Code
Department to determine the recommended depth
below the frost line for digging in your area. Choose a
minimum of this or
12
", whichever is greater. This is the
total digging depth. The diameter of the hole should
extend to a minimum of
??? (not mentioned in product
drawing either...
".
STEP 4:
Center the auger on the installation mark and
bore a hole to the required depth and diameter.
PARTS LIST
DESCRIPTION
PART
NUMBER
QTY
ITEM
Concre
te
Bollard
R-9701
1
1
Rebar
15mm
Epoxy
Coated
rb1536
3
2
1
2
FROST LINE
12"
??
