Installation / Preparation for Commissioning
TR-Electronic GmbH 2012, All Rights Reserved
Printed in the Federal Republic of Germany
Page 20 of 56
TR - ECE - BA - GB - 0095 - 19
05/30/2018
4.3 Connection
4.3.1 Series 75 / 115
Destruction, damage and malfunction of the measuring system in case of
infiltration of damp!
In case of storage as well as in the operation of the measuring system
unused connecting plugs have to be provided either with a mating
connector or with a protective cap. The IP protection class is to be
selected according to the requirements.
Protective cap with O-ring:
In case of re-close of the protective cap the existence and the correct
seat of the O-ring have to be checked.
Corresponding protective caps see chapter accessories in the Safety
Manual.
Figure 2: Connector assignment
4.3.2 Series 88
The measuring system of the series 88 is supplied with an Ethernet Hybrid Cable
without connecting plug.
