US/CN Page
1
of
4
Assembly Instructions
2019.06.14
Carnes tall table lamp
IMPORTANT SAFETY INSTRUCTIONS:
⚫
These instructions are provided for your safety. It is very important that they are read carefully
and completely before beginning the assembly and installation of this lighting fixture.
⚫
This portable luminaire has a polarized plug (one blade is wider than the other) as a safety
feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the
plug. Do not attempt to defeat this safety feature.
⚫
This fixture has been rated for up to one (1) 60-watt maximum TYPE A standard incandescent
light bulbs (not included) or one
(1)
9-watt LED bulbs (included)
or (1)
13-watt compact
fluorescent light bulbs (not included). To avoid the risk of fire, do not exceed the recommended
lamp wattage.
⚫
Light bulb should be centred inside the table shade. Making sure it does not touch the shade sides.
⚫
Use with approved REJUVENATION Shades only, having a minimum opening diameter of 3-1/2
inches and a minimum lamp-to-shade spacing of 2-1/2 inches.
⚫
The lighting fixture is meant for indoor use.
⚫
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
IC COMPLIANCE: CAN ICES-005(B)/NMB-005(B)
⚫
Please save these instructions.
WARNING:
⚫
To reduce the risk of fire, electrical shock or personal injury, always turn offand unplug the light
fixture and allow it to cool prior to replacing the light bulb.
⚫
Do not touch bulb when fixture is turned on; Do not look directly at a lit bulb.
⚫
Keep flammable materials away from lit bulb
.
PRE-ASSEMBLY:
⚫
Remove all parts and hardware from box along with any plastic protective packaging.
⚫
Do not discard any contents until after assembly is complete to avoid accidentally discarding
small parts or hardware.