Reiner speed-i-Marker 940, Руководство по эксплуатации, Страница: 30 / 92

PCset graphic Help 940 30
ERNST REINER GmbH & Co. KG
5.3.4.1.3 Passw ord Forgotten
When resetting the password, the REINER 940 is reset to factory settings.
All saved print patterns are deleted.
The password can only be reset when the REINER 940 has no device error.
If the set password has been forgotten, it can be reset as follows:
Remove print cartridge .
Set setting wheel to position C .
Push the print trigger or at least 10 seconds.
If the password is reset, a warning signal sounds.
5.3.4.2 Unlocking Device
Print images can be transferred and printed without password input.
To unlock the device, select the tab "Extras" in the menu bar and click "Device safety
Unlock device" or click the icon .
Enter password and click "Unlock".
In the toolbar , the symbol changes from to .
5.3.4.3 Lock Device
Print images cannot be transferred and printed without password input.
To lock the device again, select the tab "Extras" in menu bar and click
"Device safety Lock device".
- OR -
Click the button .
- OR -
Switch the device off and on again.
In the status display and the toolbar , the symbol changes from to .