Reiner jetStamp 1025, Руководство по эксплуатации

Страница: 35 / 83

The PCset graphic software application 35
© ERNST REINER GmbH & Co. KG
Originalanleitung
5.3.4.1.3 Forgotten passw ord
When resetting the password, the jetStamp 1025 is reset to the factory setting. All saved print
images are deleted.
The password can only be reset when the jetStamp 1025 has no device error.
If the set password has been forgotten, it can be reset as follows:
Simultaneously press the two middle menu buttons (refer to chapter 1.2 (D)) and the trigger
button for approx. 10 seconds.
When the password is reset, a warning signal is emitted.
5.3.4.2 Unlock device
Print images can be transmitted and printed without entering a password.
To unlock the device, select the "Extras" tab in the menu bar and click "Device safety
Unlock device" or click the button .
Enter password and click "Unlock".
In the status indicator and in the toolbar the symbol changes from to .
5.3.4.3 Lock device
Print images cannot be transmitted and printed without entering a password.
To lock the device again, select the "Extras" tab in the menu bar and click "Device safety
Lock device".
- OR -
Click on the button .
- OR -
Switch the device off and on