Function description 11
4.2.4
TAN generation with User-PIN
With the tan
Jack
®
photo QR EN
you can use the
TAN procedure
(standard) and the
TAN procedure
with User-PIN
to generate your TANs. If a User-PIN is assigned, you cannot generate a TAN without
entering the User-PIN first. The User-PIN therefore offers a security mechanism for your online banking.
Attention: Please use this function only when your bank has expressly confirmed its
support of this function. Improper use of the TAN function with PIN can lead to your
chip card becoming useless for your current TAN procedure!
Note for credit card users:
The PIN and PUK administration functions described below are not
available for credit cards with TAN generation function.
The User-PIN must always be entered for a TAN generation for credit cards.
The following figure shows you the full menu for the User-PIN. All sub-menus are not always displayed.
Only some of the menu items are visible depending on the application.
init:
Assigns a User-PIN. See chapter Assigning a User-PIN
change:
Changes an already assigned User-PIN.
activate:
Activates the TAN procedure with User-PIN.
deactivate:
Deactivates the TAN procedure with User-PIN.
unblock:
Unlocks the locked bank card by means of the PUK if the wrong User-PIN was entered three
times.
PIN try cnt.:
Shows the input error counter of the PIN, how many attempts you have left to enter the
correct User-PIN.
PUK try cnt.:
Shows the input error counter of the PUK, how many attempts you have left to enter the
correct PUK.
Using the User-PIN menu
Press the
-key and select the
User-PIN
menu by long pressing on key 3 on the keypad of your
device.
