01
Notes on safety
Attention!
Please read all safety notes before operating tool.
Observe the notes during use and always keep them
with the tool.
In addition to the operating instructions, generally
applicable legal and other binding regulations relating
to industrial safety and the prevention of accidents
should be observed and the relevant instructions
given.
1. The tool is only suitable for preparation of REHAU
compression sleeve joints of the dimension stated
on the tool (e.g. 10.1 x 1.1, 12 x 2.0, 14 x 1.5 or
16 x 1.5). Do not use the tool for other purposes or
dimensions.
2. Only operate the tool with original REHAU parts
and accessories.
3. Only allow repairs and maintenance to be carried
out by authorised persons. REHAU will reject any
responsibility or liability for work undertaken by
unauthorised personnel
4. Only operate the tool using both hands.
5. Keep your workplace tidy and free of obstruc-
tions. Make sure there is always sufficient light.
6. Keep unauthorised persons away from your
workplace.
7. Wear suitable work clothes. Use goggles.
Attention!
REHAU does not accept any liability for damage or
injuries that are due to unsafe use of the product,
inadequate maintenance or incorrect product and
system application. For planning and assembly, please
use our valid Technical Information. You can obtain the
current version of the document from your dealer or
your REHAU Sales Office, or you can download it at
www.rehau.uk
06
