RG-MTP58B User Manual
www.regotek.com
- 5 -
refer to details in Chapter 4.2), otherwise the black mark can not be detected
correctly.
It would be better use up the power of the battery before charge up it, as
it can ensure the using life of the battery. Usually the life the battery is: it only
has 80% capacity after charge and discharge 500 times. The battery
performance will be decreased with the increase of the charge and discharge
times.
Storage Precautions
The printer should be placed in such an environment that the temperature
between -40
℃
and 70
℃
, and the relative humidity is between 10% and
95%.
Normal the
rmal paper and black mark paper can‟t be kept too long, if you
need to keep the receipt for a long period, please choose long-term effective
thermal paper. The thermal paper should be keep away from high
temperature environment and point-blank sunshine, please store it where is
away from light if it has been open.
If the printer will be stored for a long time, please be sure to remove the
battery and store it separately. Otherwise may damage the battery and printer.
The battery shall be charged upon it stored more than 3 months,
otherwise it may be damaged by self-discharging.
Statement
This product is Class A. In a normal environment, this product
may cause radio interference. In this case, users may be required to
take practical measures against interference.
Manufacturer reserves the right to modify the contents of the
specification without prior notice!
