Rego RG-DTP58, Техническое руководство

Страница: 34 / 72

REGO Thermal Printer Technical Manual
www.regotek.com
34
[Notes]  
This command is ignored if a downloaded bit image has not been defined.
In standard mode, this command is effective only when there is no data in the print buffer.
This command has no effect in the print modes (emphasized, double-strike,underline, character
size, or white/black reverse printing), except for upside down printing mode.
If the downloaded bit-image to be printed exceeds the printable area, the excess data is not
printed.
The command to print bitmap downloaded into RAM bitmap is not downloaded to the FLASH
bitmap.
[Reference] GS
*

FS P n Print NV bit image
[Name] Print NV bit image
[Format] ASCII FS P n
Hex 1C 50 n
Decimal 28 80 n
[Range] 0 ≤ n ≤ 7
[Description]
This command is used to print the binary bit image which is specified by n and preloaded in the
printer’s non-volatile memory.
The binary bit image can be created and downloaded by tools on the PC. The printer nonvolatile
memory bit image can be generated through a dedicated tool on the PC and writes, the
maximum width of the bit image depends on the maximum width of the corresponding printer,
bit image size is up to 64KB.
[Notes]
This command is not effective when the specified NV bit image has not been defined.
In standard mode, this command is effective only when there is no data in the print buffer.
In page mode, this command is not effective.
This command is not affected by print modes (emphasized, double-strike,
underline, character
size, white/black reverse printing, or 90° rotated characters, etc.), except upside-down printing
mode.
If the downloaded bit-image to be printed exceeds one line, the excess data is not printed.
The bit image must be a binary bit image.
It is required a specified tool to download the bit image, see REGO Tools.
GS v 0 m xL xH yL yH d1 … dk Print raster bit image
[Name] Print raster bit image
[Format] ASCII GS v 0 m xL xH yL yH d1 … dk
Hex 1D 76 30 m xL xH yL yH d1 … dk
Decimal 29 118 48 m xL xH yL yH d1 … dk
[Range] 0 ≤ m ≤ 3, 48 ≤ m ≤ 51
1 ≤ (xL + xH × 256) ≤ 256 (0 ≤ xL ≤ 255, xH = 0, 1)
m Mode Vertical Dot Density (DPI) Horizontal Dot Density (DPI)
0, 48 Normal 203 203
1, 49 Double-width 203 101
2, 50 Double-height 101 203
3, 51 Quadruple 101 101