Regin Regio Midi Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 90

Regin Regio Midi Скачать руководство пользователя страница 2

DISCLAIMER

The information in this manual has been carefully checked and is believed to be correct. Regin however, makes no
warranties as regards the contents of this manual and users are requested to report errors, discrepancies or ambiguities to
Regin, so that corrections may be made in future editions. The information in this document is subject to change
without prior notification.

The software described in this document is supplied under license by Regin and may be used or copied only in
accordance with the terms of the license. No part of this document may be reproduced or transmitted in any form, in any
fashion, electronically or mechanically, without the express, written permission of Regin.

COPYRIGHT

© AB Regin. All rights reserved.

TRADEMARKS

Some product names mentioned in this document are used for identification purposes only and may be the registered
trademarks of their respective companies.

February 2018

Document revision: 1.7

The functions described in this manual are handled using Regio tool

©

version 1.6

«
1
2
3
4
...
»

Содержание Regio Midi



























































































Отзывы:

Нет отзывов