Regin REGIO ARDO, Руководство пользователя, Страница: 64 / 134

Setpoint
5 Setpoint
Different setpoint and deadband settings are used by the different controller states, see section 2.4 , to
regulate the heating and cooling distribution. Figure 5-1 shows the setpoint and deadband configuration
settings in Application tool.
Figure 5-1 Setpoint and deadband configuration settings in Application tool.
An overview of the setpoint and deadband configuration settings are provided in Table 5-1 .
Table 5-1 Setpoint and deadband settings overview.
Configuration setting Controller state applicability
Heating setpoint, occupied (°C)
✓ Standby
✓ Occupied
✓ Bypass
Cooling setpoint, occupied (°C)
Heating setpoint, unoccupied (°C)
✓ Unoccupied
Cooling setpoint, unoccupied (°C)
Standby deadband (°C)
✓ Standby
Frost protection setpoint (°C)
✓ Off
CO2 setpoint (ppm)
✓ Unoccupied
✓ Standby
✓ Occupied
✓ Bypass
5.1 Active setpoint
The active setpoint is the setpoint value currently being used for control. The active setpoint is determined
by:
✓
The current controller state in use.
✓
The configured setpoint and deadband settings.
✓ Any applied setpoint adjustment. Note that setpoint adjustment is not active in certain controller
states.
64 Regio Ardo manual, Rev. D