Regin REGIO ARDO, Руководство пользователя, Страница: 46 / 134

Control functions
2.9 Two rooms
Two rooms is a control function that enables the controller to control two separate rooms independently of
each other.
For information about room unit identification in a two-room installation, see section 3.6 .
Figure 2-40 Two rooms configuration settings in Application tool.
When the two rooms function is enabled, all configuration settings for room 2 are displayed in all panes in
Application tool.
Figure 2-41 shows, for example, how setpoint settings for room 1 and room 2 are displayed.
Figure 2-41 Example of room 2 configuration settings in Application tool.
The configuration settings for the two rooms function are described in Table 2-26 .
46 Regio Ardo manual, Rev. D