Regin RDAS-24C Series Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 18

Regin RDAS-24C Series Скачать руководство пользователя страница 12

Figure 3-3 Example address 124

Set address "50"

1. Enter addressing mode: and hold the button for longer than 1 second until LED shines red, then release

button (before LED gets dark).

2. Skip 1-digits: Hold button pressed until LED shines green - release button

3. Set 10-digits: Press button 5-times -> LED flashes green per button press

4. Store address (skip 100-digits): hold button pressed until LED shines red - release button

-> address is stored and displayed 1 time for confirmation

Figure 3-4 Example address 50

Set address "5"

1. Enter addressing mode: and hold the button for longer than 1 second until LED shines red, then release

button (before LED gets dark).

2. Set 1-digit: Press button 5-times -> LED flashes red per button press

3. Store address (skip 10-digit and 100 digit): Press button until LED shines red -> address is stored and

displayed 1 time for confirmation

Figure 3-5 Example address 5

3.4 Commissioning

3.4.1

Workflow 1

During commissioning check/set the following:

✓

Bus configuration (address, baudrate, transmission mode, and optionally termination). The default
address 255 allows to mount and power multiple actuators at the same time without interfering with
each other.

✓

Damper actuator parameters (opening directions, position limits, positions adaptation etc.) can be
checked via the Modbus register.

3.4.2

Workflow 2

The devices can be configured over bus if the pre-commissioning settings allow for a connection between the
Modbus master / programming tool and peripheral devices (i.e. non-conflicting addresses and matching
baudrate / transmission format).

12

RDAS…-24C variable list, Rev. A

«
...
10
11
12
13
14
...
»

Содержание RDAS-24C Series



















Отзывы:

Нет отзывов