Checking the Parts List
Ensure you have the following parts:
1.
7’ Modular
telephone line cord.
2.
10’ Modular coiled
handset cord.
3.
8" Modular wall
mount telephone
line cord.
4.
Wall mount clip.
Connecting the handset cord
1
Plug one end of the handset cord into the modular jack on
the handset.
2
The remaining end of the handset cord plugs into the jack
located on the left side of the base unit.
3
4
2
1
Handset Cord
User’s Guide
Installing the Telephone
10
Regency™ Series 200 Single Line Telephone
User’s Guide
Programming The Telephone
Message Retrieval Button Programming (Voice Mail)
The Regency 200 was designed with a Message Retrieval feature.
When the Message Retrieval button is pressed, the set will
automatically call voice mail systems (Message Manager). As an
option, the Message Retrieval button can also store your voice
mail password that is used to retrieve messages.
Programming the Message Retrieval Button
1
While in ‘OFF HOOK’ state,
press the
STORE
key.
2
Using the keypad, enter the
number required to call your
voicemail system. If entering a
password/PIN* number into
memory following this number,
be sure to add pauses after the
telephone number sequence
to cause a delay before the password is released.
3
After entering the number, press the Message Retrieval Button
to store the number.
4
To exit, place phone handset on base (ON HOOK).
5
To delete an incorrect entry, repeat steps 1, 3 and 4.
* CAUTION: When a PIN or password is programmed into memory,
other users can obtain the messages. A password is not required
to be programmed.
Regency™ Series 200 Single Line Telephone
5
Содержание Regency 200 Series
Страница 1: ...4666 200 2003 04 C User s Guide Regency Series 200 Single Line Telephone ...
Страница 2: ......
