Any problems or questions call Regency Office Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
Stand Up Storage Cabinet LSC4136 • INSTRUCTIONS
Parts: O: Left Door • P: Right Door • Q: Bottom Stringer • R: Top Support(2) • S: Bottom • T: Sides(2)
U: Shelf(2) • V: Back
STEP 1 :
Insert 1 Cam Pin(A) into Back(V) and connect/
tighten
(figure 1)
the Bottom(S) to the back. Also connect Bot-
tom Stringer(Q) as shown below.
Figure 1: To open Cam, point
arrow toward Cam Pin hole.
To lock Cam, turn clockwise.
A B
C
D
R
P
U
Q
T
S
E
F G
H
I J K L M
N
Hardware :
A:
Cam Pin(13) •
B:
Cam Cap(12) •
C:
Cam Plug(4) •
D:
Wood Screw(4)
E:
Small Screw(32)
F:
Hinge(4)
G:
Hinge Mount(4) •
H:
Glides(4) •
I:
Handle(2) •
J:
Handle Screw(4)
K:
Shelf Pin(4)
L:
Lock Screws(4) •
M:
Lock Lip •
M:
Keys(2)
O
V
V
Q
A
V
S
