REGEN S-VIBE
5
Care and Maintenance
POWER SUPPLY INSTRUCTIONS
Charge the device fully before its first use.
Insert the DC power plug cable into the REGEN S-VIBE USB-port.
Connect the USB side into a USB charger, e.g. cell phone charger or computer. The LED light flashes
continuously during charging and turns off when the device is fully charged.
CLEANING THE BRUSH
After each treatment, clean the brush under lukewarm water and use mild soap if necessary.
Let the brush air dry.
Your face cleansing brush is made of very durable medical silicone and will last for a long time. The
silicone keeps the brush clean from bacteria and impurities.
Do not clean the device during charging.
PRECAUTIONS FOR SAFE USE
Do not use the brush with silicone dissolving products or granular epilating agents.
Avoid exposing the device to direct sunlight.
Stop the treatment immediately if your skin becomes irritated or develops a rash.
Do not disassemble the brush.
Keep out of reach and sight of children.
1.
Massage/ cleanse
your skin with soft
circular motions.
Start by moving the
brush along the jaw
towards your ear on
either side.
3.
Clean the area
around your eyes
with gentle
movements, from the
base of your nose
towards your ears.
2.
Clean your forehead
from the middle to both
sides with horizontal
movements.
4.
Finish the procedure
with vertical
movements on both
sides of your
nose.
