REFUSOL 20K-2T Скачать руководство пользователя страница 9

Страница: 9 / 72

Safety and Responsibility

Personal Protective Equipment

REFUsol 20K...33K-2T
982079 | 05 | 2021-03

▷

Persons installing, operating or maintaining prod

ucts must not be under the influence of drugs or
medication.

▷

Use only accessories and spare parts approved by
REFU Elektronik GmbH in order to exclude a per

sonal hazard due to unsuitable spare parts.

▷

Observe the technical data and the ambient condi

tions specified in the operating instructions.

▷

Observe safety notes and instructions in third-party
documentation.

▷

Do not put the product into operation until it has
been determined that it complies with country-spe

cific rules, regulations, safety regulations/certifi

cates and application regulations.

2.8 Personal Protective Equipment

REFU Elektronik GmbH recommends to wear the

following personal protective equipment.

∘

Safety shoes

∘

Protective gloves

∘

If required: transport aid

∘

Safety goggles

✅

Observe the instructions of the respective manufac

turer.

✅

All components of the personal protective equip

ment must be intact.

2.9 Five Safety Rules When Working on Elec

trical Systems

Disconnect electrical systems (lock and tag)

according to the five safety rules:

▷

Unlock and disconnect completely.

▷

Secure against re-connection.

▷

Check that there is no voltage (DC and AC).

▷

Carry out earthing and short-circuiting.

▷

Provide protection against adjacent live parts.

Содержание 20K-2T









































































Результаты поиска

Содержание 20K-2T

Отзывы:

Бренды по названию

Популярные бренды

REFUSOL 20K-2T, Руководство по эксплуатации

Результаты поиска

Содержание 20K-2T

Отзывы:

Бренды по названию

Популярные бренды