REFUSOL 20K-2T, Руководство по эксплуатации

Страница: 44 / 72

Installation 44
Connect Communication
REFUsol 20K...33K-2T
982079 | 05 | 2021-03
Configure WiFi Stick with PC
✅ The WiFi stick is mounted.
✅ Inverter is in operation.
✅ Computer (PC, tablet, smartphone) is prepared.
1. Connect the computer to the access point of the
WiFi stick.
The name of the access point is "AP" followed by the
serial number of the WiFi stick (see WiFi stick type
plate).
2. Enter the password of the WiFi stick (see WiFi stick
type plate).
3. Open the Internet browser and enter the address
10.10.100.254.
4. Enter user name "admin" and password "admin".
➪ The status page opens.
5. Click the "Wizard" button to configure the settings
of the WiFi stick.
➪ If configured correctly, the WiFi stick is recognised
in the network and starts sending monitoring data
to REFUlog.
⟇ To start the configuration wizard directly, scan the
QR code stuck on the Wifi stick and follow the
instructions shown.
4.11.5REFUlog Monitoring Portal
As soon as an Internet connection is established via
WiFi or Ethernet, the
REFUsol 20K...33K-2T
automatically
send their operating data to the REFUlog monitoring
portal every 5 minutes.