Reflex Variomat VS 1, Руководство по эксплуатации, Страница: 20 / 68

Installation
20 — English Variomat 1 — 06.07.2016 – Rev. B
6.3.3 Tank installation
ATTENTION
Damage due to improper installation
Additional device stresses may arise due to the connection of pipes or system equipment.
• Ensure that pipes are connected from the device to the system without stresses being induced.
• If necessary, provide support structures for the pipes or equipment.
ATTENTION
Device damage resulting from dry running of the pump
If the pump is incorrectly connected, there is a risk of dry-running.
• Ensure that the connections for the overflow collector and the pump are not interchanged.
• Ensure correct connection of the pump to the primary tank.
Comply with the following notes regarding the installation of
the primary tank and the secondary tanks:
• All flange openings at the tanks are viewing and
maintenance openings. Install the primary tank and the
secondary tanks, if provided, with sufficient spaces at the
sides and the top.
• Install the tanks on a level surface.
• Ensure rectangular and free-standing position of the tanks.
• If you use secondary tanks in addition to the primary tank,
ensure that all tanks are of the same type and dimensions.
• Do not attach the tanks to the flooring to ensure the
functioning of the "LIS" level sensor.
• Install the control unit on the same level as the tanks.
(All data in mm)