Reflex Servitec 30, Руководство по эксплуатации

Страница: 38 / 58

Controller
38 — English Vacuum spray degassing — 06.07.2016 - Rev. B
9.2 Customer menu
Use the Customer menu to correct or determine system-specific values. In the course of commissioning, the factory settings must be
adjusted for the system-specific conditions.
see chapter 9.5 "Parametrising the controller in the Customer menu" on page 40 .
9.3 Service menu
This menu is protected with a password. It can be accessed only by the Reflex Customer Service. A partial summary of the settings stored
in the Service menu is proved in the Chapter Default settings, see chapter 9.4 "Default settings" on page 39 .