Reflex iC60H, Справочное руководство

Страница: 32 / 44

Use
32
A9MA03EN 02/2012
Operation
Local Indication (LED)
State of the LED indicator on the Reflex iC60 integrated control circuit breaker with and without
Ti24 interface:
LED (item H) Circuit breaker status
The integrated control circuit breaker is ready.
It is possible to control the closing of the contactor by means of Y1, Y2, Y3 and the
pushbutton on the front of the Reflex iC60 circuit breaker.
The integrated control circuit breaker is closed.
It is possible to control the opening of the contactor by means of Y1, Y2, Y3 and the
pushbutton on the front of the Reflex iC60 circuit breaker.
The integrated control circuit breaker is open or tripped.
No control (locally by means of the pushbutton or Y1, Y2, Y3) is possible.
The following actions are necessary in order to control the circuit breaker:
z
If the circuit breaker is tripped, the user must:
z
Act locally by eliminating the fault downstream of the Reflex iC60 circuit breaker
z Set the handle to the upper position: auto (I.ON).
z
If the circuit breaker is open, the user must:
z Set the handle to the upper position: auto (I.ON).
Overheat protection of the remote control is active.
No control is possible at present.
It is possible to choose the integrated control circuit breaker operating mode.
Choice of the integrated control circuit breaker operating mode is in progress.
The poles of the integrated control circuit breaker are welded.
The integrated control circuit breaker is out of order.