Description of the device
Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B
English — 15
4.5
Scope of delivery
The scope of delivery is described in the shipping document and the content is shown on the packaging.
Proceed as follows:
1. Immediately after receipt of the goods, please check the shipment for completeness and damage.
2. Please notify us immediately of any transport damage.
Basic make-up equipment:
•
The pre-wired device.
•
Operating manual.
4.6
Optional equipment and accessories
The following optional equipment and accessories are available for this device:
•
"FQIRA+" contact water meter.
•
Softening with Reflex Fillsoft.
•
Expansions for Reflex Basic controllers:
– I/O modules
– Bus modules:
•
Lonworks Digital
•
Lonworks
•
Profibus DP
•
Ethernet
Note!
Separate operating instructions are supplied with accessories.
