Reflex Marine FROG-XT4 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 43

Reflex Marine FROG-XT4 Скачать руководство пользователя страница 20

Rev 3.1

19 | P a g e

If damage to the frame has occurred, welds should be examined for cracks using dye
penetrant.

v.

Details of all repairs or modifications carried out should be recorded and copies of
damage and repair / modifications reports should be sent to the party controlling the
use of the FROG-XT.

vi.

Lifting assembly covers should be removed if the wire rope lifting assembly is
removed from service.

vii.

Contact RML or one of our approved partners for technical advice on inspection,
testing or maintenance. It is always helpful to provide detailed photos and reports
along with any query to

[email protected].

4.5

Supporting Documentation

Customer drawing pack

Every FROG-XT comes with a drawing pack that contains all of the relevant drawings to aid
in its maintenance. This pack contains the following:

i.

Assembly drawings

ii.

Replacement parts, kit drawings

iii.

Torque settings

iv.

Operational stickers

v.

Bill of materials

Certification pack

Every FROG-XT comes with a certification package, which includes, but not limited to,

manufacturer’s declaration of conformity,

all of the critical parts certificates, load test

certificates and the third-party release note and checklist.

If any further certification is required, please contact RML.

Component certification

RML retains copies of the certification for all units and components involved in their

manufacture. Replacement copies are available on request.

«
...
18
19
20
21
22
...
»

Содержание FROG-XT4












































Отзывы:

Нет отзывов