Reflex Marine FROG-3 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 77

Reflex Marine FROG-3 Скачать руководство пользователя страница 61

User Manual

FROG-3

Rev 19

Page61

8.2.7

Storage

The  FROG-3  has  been  designed  to  cope  with  the  harsh  conditions  on  an  offshore  installation  or
vessel; however it is important to protect the unit as much as possible from any hazardous elements
and UV degradation.

It  is  recommended  that  the  FROG-3  is  covered  with  the  FROG-3  weatherproof cover  whilst  not  in
use.  The cover fits the standard FROG-3 in both configurations.

A  heavy  duty  version  of  the  protective  cover  is  also  available
(awaiting photo)

Fig 12: FROG-3 Protective Cover

8.2.8

Feet Deformation During Storage

Prolonged periods of exposure to hot decks and self-weight can cause permanent set deformation of
the elastomeric feet.  It is advised that if the Frog is to be stored for prolonged periods of inactivity
then the user should consider a set of chocks to lift the feet away from the deck.

Reflex can supply a dedicated set of supporting chocks that are designed to fit properly underneath
the main base frame of the Frog 3 without impinging any exposed bolt heads.  The chocks are pre-
laid on the deck ready for landing the Frog directly to the storage position.

«
...
59
60
61
62
63
...
»

Содержание FROG-3














































































Отзывы:

Нет отзывов