Reel FlexiMova mm F0K37 Series, Руководство по проектированию и установке

Страница: 32 / 84

6 Transportation – Storage - Disposal
32 of 80
FlexiMova
®
mm - Design and Installation
6 Transportation - Storage - Disposal
6.1 Packaging
Upon delivery of the goods check every package to verify that there are no
visible signs of damage. The packaging enclosure, when the product is supplied
separately as a separate non-assembled element, must be intact and dry. In the
event of damage during transit determine the exact extent of the damage,
document it and notify the supplier immediately.
6.2 Transportation
For assembled converter and motor secure and move the product as illustrated
in
Figure 9 .
Figure 9 : Transporting the product mounted on the motor
6.3 Storage
If the product is to remain unused for a long time:
1) Thoroughly clean the product
2) Store it in the original packaging
3)
Place it in an environment that is:

Dry with no strong fluctuations of moisture.

Vibration-free.
 Safe.
 Sheltered from extreme weather conditions, direct sunlight and dust.
4) Cover it with a sheet or use some other protective means to avoid buildup
of dust.
When handling masses >25 kg it is mandatory to employ 2 operators or to
use appropriate lifting equipment.
WARNING
Safely move the product and motor to the designated position.
Observe the centre of gravity and the masses of the product.
Observe the accident prevention regulations in force in the country of use.
Use approved lifting equipment.
DANGER