Reel FlexiMova mm F0K37 Series, Руководство по проектированию и установке

Страница: 27 / 84

5 Product specifications
FlexiMova
®
mm - Design and Installation
27 of 80
5.10 Intended use
Table 22 : Intended use
Field of application Industrial and artisanal sector
Place of use
In a sufficiently ventilated place that is not exposed to direct sunlight
and that allows enough room so that removal operations are not
hindered. The product can even be used in aggressive environments,
not necessarily in an electric cabinet.
Intended use To control a standard electric motor or a REEL SuPremE
®
vector motor
Installers
Authorised operators meeting the professional technical requirements
described in
par. 2.4 .
5.11 Reasonably foreseeable misuse
The product has been designed and constructed for the use described in par.
4.1 , therefore any other use or application is prohibited. This is to ensure the
safety of authorised operators and the effectiveness of the product at all times.
INFORMATION
The optimal operating temperature is -10 °C to +40 °C
The technical performance of the product decreases in one of the following
conditions:
a) average temperature over 24 h > +35 °C
b) operating temperature > +40 °C
c) operating temperature < 0 °C
If the temperature is higher or lower than the optimal operating temperature
the product applies a power derating in relation to the power output.
DANGER
It is forbidden to put the product into service in potentially explosive
environments and/or in presence of combustible or inflammable substances.
DANGER
1) It is forbidden to use the product improperly or for uses other than
those foreseen by the Manufacturer
(see par. 5.10) .
2) It is forbidden for unauthorised persons (see par. 5.10) or any persons
who are not physically and mentally alert to use the product .
3) It is forbidden to use the product in explosive atmospheres or
environments where gases, fluids are present, or where it can come into
contact with flammable components.
4)
It is forbidden to use the converter with an electric motor that does not
have the features indicated in
(see par. 8.1.4) .
5) It is forbidden to use the product in environments with temperatures
above or below the values indicated in
Table 15 .
6)
It is forbidden to use the product in open spaces in the presence of
reasonably foreseeable dangerous atmospheric events (e.g. lightning).