Reef flare device manual
11/14
your program (function available in the upper right part of the screen). You can create many
lamp operation presets and save or load them anytime you like. You can also export your
settings (for instance to share them with another person) or import other settings (for example
settings exported by other users).
The image above shows a view of the lamp set up process in the PROGRAMS mode. From
bottom to top, we have the following functions:
- scale - extends or narrows the time scale in order to fine-tune the lamp.
- The
button makes it possible to set individual light colors and light intensity on a
timeline, while the
button can be used to remove light colors entered earlier. The
last button
launches the simulation of your daily lamp configuration.
To get the hang of it, test all the lamp functions described above. This way, it will be easier
for you to create the best setup modes for your aquarium.
- TIMER MODE - in this mode you can set the lamp to operate for a specified time with
individual settings for each light color. After this time, the lamp will return to the PROGRAMS
mode and will operate in accordance with the specified schedule. On the right-hand side of
the screen there is an active time counter that shows how much time is left until the TIMER
MODE ends. The timer mode was developed with aquarists and their animals in mind. It
makes it possible to return to the previously programmed lamp settings after the specified
time. A lamp that does not return to the programmed state and operates continuously may
negatively influence the health of animals. The timer mode also allows you to save your
presets, just like in the PROGRAMS mode. This mode may be also used to temporarily
change the lamp operation settings, for instance to take photos. During the photo shoot, you
