Reed Manufacturing
1425 West 8th Street
Erie, PA 16502 USA
Phone: 800-666-3691 or +1-814-452-3691
www.reedmfgco.com
NOTES:
1. Use clean dry air. Air containing excessive water
will cause damage. Max Pressure that can be used
with this FRL is 150 psi.
2. Oil amount adjusting valve is operated manually.
Counterclockwise rotation increases amount. Three
turns opens valve fully. Numbers on scale do not
indicate drops amounts.
3. Periodically check water level in air filter bowl.
Remove water by loosening water drain on bottom
of air filter bowl.
1120-54341
1 of 2
Filter-Regulator-Lubricator for Bear Hug™
PE Squeeze Tool System
PESFRLA #04331 Instructions
AIR FLOW DIRECTION
AIR FILTER
PRESSURE
GAUGE
PRESSURE
REGULATOR
AIR
LUBRICATOR
OIL ADJUSTING
VALVE KNOB
OIL FILL CAP USE
ONLY AIR LINE OIL
REED PART # 97583
OR EQUIVALENT
AIR OUTLET
(TO MOTOR)
PULL KNOB DOWN AND ROTATE TO
ADJUST PRESSURE. PUSH UP TO LOCK
MANUAL
WATER DRAIN
AIR INLET
(FROM AIR COMPRESSOR)