reechcraft.com/powerlift 888-600-6160
49
6.2
Preventive Maint Inspection Schedule
The preventive maintenance and inspection checks are listed and defined in Table 6.0.
The table is divided into two parts: “Area” and “Interval”. The component or function to
be inspected is listed in the Area column and the interval at which time they are to be
inspected is listed in the Interval column.
Note:
The checks and services listed in this schedule are not intended to take the place of
any local or regional regulations that may pertain to this type of equipment, nor should
the list be considered as all inclusive. Variances in interval times may occur due to the
environment the machine is subjected to.
Inspection and Maintenance Codes:
1. Check for proper and secure installation.
2. No gouges, excessive wear, or dents showing.
3. Visually inspect for excessive wear, damage, cracks, or distortion.
4. Check for cracked or broken welds.
5. Check area is clean and free of debris.
6. Check for proper adjustment.
7. Check for proper operation.
8. Check for proper spring back.
9. Check for signs of leakage.
10. Check for proper tolerances.
11. Check for proper specifications.
12. Verify.
13. Perform.
14. Replace.
15. Inspect per Operator’s Safety Manual.
S MAINTENANCE
SECTION
6
