NEO SLIMLINE WALL HUNG VANITY UNIT
NEO BASIN INSTALLATION INSTRUCTIONS
No claims for damages / defects will be recognised after installation.
Prior to installation it is important to unpack and inspect your products to ensure no damage has
occurred in transit and that the product IS CORRECT.
If damage has occurred, or a visible defect exists, do not proceed with installation and contact supplier
IMMEDIATELY.
Step 1. Mark out bolt positions ensuring they are level and at the correct height.
Step 2. Installer to determine appropriate fixings, ensure wall is suitable and studs, noggins etc. are in
appropriate locations.
Step 3. Once appropriate fixings are in the wall, place basin over bolts and tighten.
See figure 1.
Figure 1.
ASSEMBLY LIST
Neo basin
(purchased seperately)
Designer handle
Slimline drawer
Cabinet body
Dimensions are approximate. Information provided in this installation is a guide only. We recommend having the product on site prior to rough in.
Plumbers, please ensure a copy of the installation Instructions is left
with the end user for future reference
Above Basin
Micro Trap Assembly
To be installed
with micro trap
15168 (supplied).
page
1 of 5
