EXO WALL SINK
SET
50
SPECIFICATIONS
Recommended use
Colour availability
Pressure rating
Temperature rating
Suitable Hot Water
Units
Material
240
Domestic, hotel and commercial
0
0
C'\I
Chrome, Matt Black, Gunmetal, Brushed Nickel
Maximum continuous operating pressure 1 000kPa.
For best performance and longer life we recommend
150-500kPa
Hot and cold water inlet pressure should be equal.
Maximum continuous working temperature 80
°
C
Storage tank: Yes
Continuous Flow: Yes
Gravity Feed: Not suitable
Typically Electroplated Brass
pagel of4
019
To see the complete MILLI range go to
www.reece.com.au/bathrooms
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product
warranty - refer to Warranty Conditions.
WaterMark
AS/NZS3718
WMKA01455
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people.
The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior
notification. Dimensions are nominal measurements only. Dimensions and set-outs Hsted are correct at time of publication
however the manufacturer/distributor takes no responsibHity for printing errors.
Tech Page Version - INS347 I Rev 00.
reece
