Setup for STATIC IP
1)
Connect LAN port of PC and RWC5020A Ethernet port
using RJ45 cable
. If the
PC and RWC5020A are connected directly, cross cable must be used.
2)
Turn RWC5020A power ON, press
key to jump on the system
configuration screen and configure IP address.
3)
Put the same IP address with RWC5020A’s IP address except last slot. For
reliability, it is recommended to disable all other networks (e.g. WiFi, Virtual
Machine) than Ethernet in Network Adapter Settings of a remote PC.
4)
Run software and set up the same IP address with RWC5020A.
Содержание RWC5020A
Страница 3: ......
