INSTALLATION & ASSEMBLY GUIDELINES
NOTE
: Loose or sandy soil may require the frames to be anchored by pins or concrete. High wind areas will require the frames to be placed closer
together and the covering buried or held down with weights along its’ sides. When not in use – remove the frames from the ground to help prevent
corrosion.
Prepare and cultivate bed. Push the frames into the Place the cover loosely Stretch the cover firmly
Place marker lines as a guide.
ground. Dig 150mm deep
over the frames and bury
holes at each end of the bed the first end
Bury the second end
Secure the cover in place Exclusive adjustable clips There is easy access for
by locating the wire clips ensure that the cover planting, watering and
into the frame holes. stays where you want it. crop tending.
Important:
Take care not to puncture film.
(Ensure that clips extend beyond
the edge of the film)
Angle end frames slightly
outward
Marker Guide
Note: holes should be at
ground level
WWW.REDPATH.CO.NZ PH: 0508 733 728
