Redmond RJ-M906, Инструкция по эксплуатации

Страница: 10 / 23

10
ENGLISH
USE THE JUICE EXTRACTOR
STEP ONE
STEP TWO
STEP THREE
Assemble a juice extractor, according to section «Assembling»
Wash out the fruits or vegetables before making
the juice. Most of the fruits and vegetables do not
have to be sliced, since loading tray is wide enough.
however, too big fruits/vegetables must be sliced
before loading. hard skin fruits/vegetables must be
cleaned before loading.
Feed the cut fruits/vegetables into the loading tray,
and use the pusher to press them gently to the
rotating filter.
turn on power supply and set the regulator to 1 (low
speed), or 2 (high speed) position.
speed 1: assigned for soft fruits or vegetables, such
as water melon, grape, tomato and cucumber.
Speed 2: assigned for comparatively hard fruits or
vegetables, such as apple, carrot, and celery stem.
Load fruit/vegetables into a mouth of a loading tray
only at power ON.
Use a pusher (8) for pushing of products through. Do
not make excessive effort at working with a pusher–
is can worsen juice rate and reduce device service
life.
Juice will follow into jug (11), and pulp – in the
container for pulp (3).
HINT
If you will press a pusher slowly you will get more juice.
For increase of an overall performance of a juice extractor we recommend you to make short
breaks for cleaning of the mesh filter. At processing of products wash out the mesh filter after
every 1,5-2 kg.