manualshive.com logo in svg

RedMax AN-100U, Руководство пользователя, Страница: 58 / 106

Поделиться
Скачать
RedMax AN-100U Скачать руководство пользователя страница 58

 Red

MAX

™

  

Base Station

 

user manual

 

 

 

 

 

Doc. #70-00058-01-01-DRAFT 

Proprietary Redline Communications © 2006

 November 

29, 

2006 

Page 58 of 106

 

 

4.4.2 Ethernet 

Interface 

Click 

Ethernet Interface

 in the system menu (left side of screen) to view and configure 

the front panel Data and Management (Mgmt) Ethernet ports. 

 

Figure 26: Web - Configuration - Ethernet Interface Screen 

Management

: Use this selection to choose which front panel Ethernet port accepts 

management traffic. 

Via Data port

: The Data Ethernet port is used for data and local management traffic. 

The Mgt port is disabled. 

Via Management port

: Only the Mgt Ethernet port is monitored for local 

management traffic. Select this mode only when data and management networks are 
physically isolated. 

Data Port Settings

: This setting controls the speed of the Ethernet Data port. 

Auto Detect

: Auto-negotiate the speed and duplex. 

10 Mbps Half Duplex

: Operate at 10Base-T half duplex mode only. 

10 Mbps Full Duplex

: Operate at 10Base-T full duplex mode only. 

100 Mbps Half Duplex

: Operate at 100Base-T half duplex mode only. 

100 Mbps Full Duplex

: Operate at 100Base-T full duplex mode only. 

Management Port Settings

: This setting controls the speed of the Ethernet Management 

port. 

Auto Detect

: Auto-negotiate the speed and duplex. 

10 Mbps Half Duplex

: Operate at 10Base-T half duplex mode only. 

10 Mbps Full Duplex

: Operate at 10Base-T full duplex mode only. 

100 Mbps Half Duplex

: Operate at 100Base-T half duplex mode only. 

100 Mbps Full Duplex

: Operate at 100Base-T full duplex mode only. 

Configuration Buttons 

Save

: Click Save to save and apply the current settings. 

Cancel

: Click Cancel to change all settings to the last saved values. 

Default

: Click Default to change all settings to the factory default values. 

 

Содержание AN-100U











































































































Отзывы:

Нет отзывов