RP8272, RP8274 & RP8275 Series
Impact Wrench
Copyright 2008, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks,
model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.
EC DECLARATION OF CONFORMITY
We, Chicago Pneumatic Tool Co. LLC,13325
Carowinds Blvd., Charlotte, NC 28273 USA, declare
under our sole responsibility that the product to which
this declaration relates, is in conformity with the
requirements of the Council Directive of June 1998 on
the approximation of the laws of the Member States
relating to machinery (98/37/EC).
Machine Name
RP8272, RP8274 & RP8275 Series
Impact Wrench
Machine
Type
Assembly Power Tool for Threaded
Fasteners - No other use is permitted.
Serial
No.
Tools with No. C-00501-2007 or higher
Technical
Data
3/4" (19mm) Sq. Dr. Std.
Air pressure 90 psi (6.2 bar)
Air Consumption 23 l/s (48 cfm)
Harmonized
Standards
Applied
EN792-6
National
Standards
Applied
ISO 8662-7, ISO 15744-
2002
Name
And
Position
Of
Issuer
Bruno Blanchet,
General Manager
Signature
Of
Issuer
Date
Of
Issue
June 15, 2008
Noise & Vibration Declaration*
Sound pressure level 96 dB(A), uncertainty 3 dB(A),
in accordance with ISO 15744-2002. For sound
power, add 11 dB(A).
2
Vibration value 9 m/s , re. ISO 8662-7.
For making estimates of daily vibration exposures, useful
information may be found in CEN/TR 15350: 2006,
"Mechanical vibration - Guideline for the assessment of
exposure to hand-transmitted vibration using available
information including that provided by manufacturers of
machinery"
*These declared values were obtained by laboratory type
testing in compliance with the stated standards and are not
adequate for use in risk assessments. Values measured in
individual work places may be higher than the declared
values. The actual exposure values and risk of harm
experienced by an individual user are unique and depend
upon the way the user works, the workpiece and the
workstation design, as well as upon the exposure time and
the physical condition of the user. We, Chicago Pneumatic,
cannot be held liable for the consequences of using the
declared values, instead of values reflecting the actual
exposure, in an individual risk assessment in a work place
situation over which we have no control.
INSTRUCTION MANUAL
This product is designed for installing and removing
threaded fasteners in wood, metal and plastic. No other use
permitted. For professional use only.
Air Supply Requirements
1. Supply tool with 90 psig (6.2 bar) of clean, dry air. Higher
pressure drastically reduces tool life.
2. Connect tool to air line using pipe, hose, and fitting sizes
shown in the diagram.
Lubrication
1. Use an air line lubricator with SAE #10 oil, adjusted to
two (2) drops per minute. If an air line lubricator cannot
be used, add air motor oil to the inlet once a day.
2. Use 2 oz. (52 ml) of CP Pneu-Lube Synthetic Clutch
Grease 8940158455.
Operation
1. The intended use of this impact wrench is with impact
rated sockets operating upon threaded fasteners. To
operate, pull trigger on handle. To operate in forward
rotation, turn reverse valve toward forward arrow position.
To operate in reverse, turn valve toward reverse arrow
position.
2. This impact wrench is equipped with a regulator to
enable adjustment of output power. Turn the regulator
lever to # 3 for maximum power, to # 1 for minimum
power.
Maintenance
1. After first year, disassemble and inspect air motor and
impacting clutch every three (3) months if the tool is used
every day. Replace damaged or worn parts.
2. High wear parts are underlined in the parts list.
3. To keep downtime to a minimum, the following service
kits are recommended:
Tune-Up Kit for RP8272, RP8274 & RP8275
2050524703 (Incl: 3, 5, 6, 15, 23, 26, 31, 33, 37, 45, 49)
Repair Kit for RP8272
2050524713 (Incl: 3, 5, 6, 7, 8, 9, 15, 23, 26, 31, 33, 37, 45, 49)
Repair Kit for RP8274
2050528803 (Incl: 3, 7B, 8, 9, 15, 23, 26, 31, 33, 37, 45, 49)
Repair Kit for RP8275
2050524713 (Incl: 3, 5, 6, 7A, 8, 9, 15, 23, 26, 31, 33, 37, 45, 49)
English
EN
1/2" (12mm)
CA048361 (1/2")
CA048362 (1/2")
CA048360 (1/2")
1/2" (12mm)
1/2" (12mm)
1/2" (12mm)
1/2" (12mm)
1/2" (12mm)
Содержание RP8272 Series
Страница 32: ...NOTES...
Страница 33: ...NOTES...
