Redexim Speedseed 1100 Скачать руководство пользователя страница 5

Redexim

 

 

 

1.  SAFETY INSTRUCTIONS 

 
This machine is designed for safe use. This can only be achieved if you completely follow the safety 
instructions described in this manual. 
 

Read and understand

 the manual 

before

 you start using this machine. 

If the machine is not used as described in this manual, this can result in injuries and/or damage to the 
machine. 
 
This user manual lists instructions that are numbered in sequence. You should follow this sequence. A 

 is an indication of a safety instruction. A 

 means a tip and/or note. 

 

1.1.  Obligations of the user 

 
Treating fields/lawns is the only purpose of the machine. Any other use is improper. The manufacturer 
will not accept any liability for damage resulting from improper use. All risks occurring with this are 
entirely at the expense of the user. 
 
All persons assigned to operate, maintain and repair the 

machine

 by the owner must completely read 

and understand the operation manual and in particular the chapter of 

Safety Instructions

 
Modifications to the machine that have a negative impact on the safety must be rectified immediately. 
 
The user is obliged to check the machine for visible damage and defects before using the machine.

 

 
For safety reasons it is not permitted to make changes or adjustments to the machine (except those 
approved by the manufacturer). If modifications to the machine have been made, then the current CE 
marking is cancelled. The person that has made these modifications has to apply for a new CE 
marking himself.

 

 
Following the use, maintenance and repair instructions prescribed by the manufacturer is also 
considered proper use of this machine.  

The user is responsible for the safe combination of the machine and the towing vehicle, which comply 
with the requirements as described in the Technical Data 

(see Chapter 2)

This entire combination 

should be tested 

for noise, safety, risk and user friendliness. User instructions should also be drafted. 

 

Dress appropriately during work activities with the machine. Wear sturdy shoes with steel 
toecaps, long trousers and tie up long hair. Do not wear loose clothing. 
 

The general applicable health & safety (Dutch: ARBO) regulations must also be followed in addition to 
the instructions in this user manual. 

 

Relevant traffic regulations also apply in case of using public roads. 
 
 

Содержание Speedseed 1100

























Отзывы: